How to Replace a Saab 9-3 Key
The Saab 9-3 has an impressive attraction for drivers. It is a powerful engine with excellent visibility. It has a very high safety rating.
It is important that you have two keys that work for your vehicle. If you lose only one key, it could be expensive to replace it with the new one.
How to Replace the Ignition Key in the Saab9-3
If your car key won't turn in the ignition it is time to replace it. This guide will teach you how to replace the ignition key on the Saab 9-3. You will need a replacement key with a reprogrammable battery, and a new key-fob case.
As opposed to earlier models, modern Saab cars have a transponder in the key-fob instead physical key that can be used to unlock and start the car. The problem with this is that the reprogrammable batteries in the key-fob eventually wears out and won't hold a charge for any longer. This is particularly true if you use the same key for the lock you have.
The good news is that it can be replaced easily by a professional locksmith. If you have the right tools, and a little patience you can do it yourself. The first step is to remove the key-fob apart. Insert an open-ended head into the slot in the middle of your case. The plastic is thin and can easily be damaged.
After the case is opened, you can create the new key by combining the lower part of old key with transponder and banana. This will ensure that the new key is linked to the CIM correctly, which could make a huge difference when replacing the primary key for your Saab 9-3.
How do you replace the ignition Key on the Saab 900
If you don't have two keys you'll need to remove the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you can take off the dashboard and trim pieces around the steering wheel. Once the dash is removed, you can put a screwdriver into the hole in the back of the ignition switch and remove it.
The ignition barrel has key locks that can prevent the vehicle from starting if key isn't present in the. If your 900's ignition switch isn't functioning, check the key to determine whether it's inside the lock or stuck in the barrel of ignition. It's also a good idea to rotate your keys frequently and clean them regularly to ensure that they don't get bent.
Saab cars differ from other cars because they don't use traditional keys made of metal. Instead, the car recognizes electric signals from the key fob via a special microchip in it.
If you lose just one working key fob, your dealer will charge you an additional fee to replace your computer module (also known as the CIM). We can reprogram the EEPROM of your existing computer and make it accept new keys without the need to replace it. You'll save 50% off the price charged by the dealer! This is the SAAB KEY PROGRAM. Find out more about it here!
How to replace the ignition Key in a Saab9-5
The metal part of a traditional Saab key is simple to copy, and is also not a major obstacle against vehicle theft. The electronic part of the key-fob comes with a chip that recognizes the car when the key is inserted into the ignition switch.
Saab's anti-theft system has relied on this technology for more than 10 years. It's not as effective as a door lock but it does make stealing your car a lot more difficult. That's why every Saab owner should always have a spare key on hand.
The majority of new Saabs come with two keys right from the factory, however you can add more at an agent using a handheld computer, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 cars, which have more modern, newer features that require a key-fob.
If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules, and charge you the cost of replacement. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.
How to replace the ignition Key on an XC90 Saab
It could be time to replace your SAAB key fob if it is having difficulty turning the lock barrel. Fortunately, the process is quite simple and doesn't require you to visit a dealer. Instead you can do it yourself at home with the help of a few tools.
First, you'll need prepare the new key. Before you start, ensure that the anti-theft feature is disabled by placing blocks on the rear wheels and activating the handbrake. Then, put the key in the ignition and turn it to the ON position, which activates the accessories but does not start the engine. Repeat this five times, and then leave the key in the "on" position.
You'll need to purchase a new case for your key fob. They can be found at a variety of auto parts stores and are usually extremely affordable. You can purchase them without electronics based on the model.
To open the case, put a flathead screwdriver inside the slot located in the middle and gently work it. When saab keys 've split the case, you'll be able to access all the internal electronic components. Use a flathead screwdriver, which will gently pry open the electronic components.